MOTOROLA MDPMMN4027A

MOTOROLA MDPMMN4027A

El MOTOROLA MDPMMN4027A es un micrófono altavoz para emisoras portátiles de Motorola de la serie GP340, GP360, GP380.

Características técnicas MOTOROLA MDPMMN4027A:

• Microphone Type Omni directional Omni directional
• Sensitivity: -44dBV +/-2dBV, at 1kHz, 94dB SPL source, -44dBV +/-2dBV, at 1kHz, 94dB SPL source, at mouth reference point at mouth reference point
Distortion (THD): < 5% (TX) at 1kHz at rated audio < 5% (TX) at 1kHz at rated audio
• Speaker Diameter 45mm 45mm
• Output Power: 0.5W at rated audio 0.5W at rated audio
• Output Level: 90dB SPL typical, 200Hz - 3200Hz, at rated audio, 90dB SPL typical, 200Hz - 3200Hz, at rated audio, at 30cm from RSM at 30cm from RSM
• Maximum Output Level: < 120dB SPL at maximum radio volume < 120dB SPL at maximum radio volume
• Frequency Response: 200Hz - 3200Hz 200Hz - 3200Hz
• Distortion (THD): < 15% (Rx) at 1kHz at rated audio < 15% (Rx) at 1kHz at rated audio
• Earpiece Type 3.5mm unthreaded jack, Receive None
• Maximum Output Level: < 118dB SPL at maximum radio volume N/A
• Acoustic Feedback Distance: 35 feet typical, outdoors 35 feet typical, outdoors
• Dimensions: W x L x D 55 x 60 x 27mm 55 x 60 x 27mm (without Clothing Clip)
• Weight: 146.2 Grams (maximum) 188 Grams (maximum)
• Case Material: Lexan 141R Polycarbonate Lexan 141R Polycarbonate
• Power Source: Radio Battery Radio Battery
• Push-to-Talk (PTT): Side paddle mechanism activated via tact switch Side paddle mechanism activated via tact switch
• Flex Life: 50,000 Cycles (minimum) 50,000 Cycles (minimum)
• Pull Strength: 40 Lbs, Minimum Tensile, In-Line 40 Lbs, Minimum Tensile, In-Line
• Accessory Connector Case: Flame Retardant TPE/Black Shore A80 Flame Retardant Polycarbonate Black
• Operating Temperature: -30°C to +60°C
• Storage Temperature: -55°C to +85°C
• Thermal Shock: -57°C to +80°C
• Humidity: 90% - 95% Relative Humidity at +50°C for 8 hours at +50°C for 8 hours
• Rain: MIL 810F Method 506.4
• Salt/Fog: MIL 810F Method 509.4 Procedure 1
• Dust: MIL 810F Method 510.4 Procedure 1
• Vibration: MIL 810F Method 514.5 Procedure 1, Category 24 Procedure 1 Category 24
• Mechanical Shock: MIL 810F Method 516.5 Procedure 1
• Impact (grill): 1 1/4” diameter steel ball drop. Initial drop height is 30cm, then 1 1/4” diameter steel ball drop. Initial drop height is 30cm, then increase drop height by 10cm for at least 8 times @ 100cm. increase drop height by 10cm for at least 8 times @ 100cm.
• ESD: IEC/EN61000-4-2
• IP Rating: IP57